What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
08.06.2025 01:59
In schematic diagrams this is the symbol for a fuse:
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
2024–10–10[John johnson John Johnson ]
Neuroscience breakthroughs: Surprising truths about memory revealed in 7 recent studies - PsyPost
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
New Ubisoft Game Shutting Down Permanently in 48 Hours - ComicBook.com
He then describes the function of a fuse.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
Barnstars:
‘Strawberry Moon’ June 2025: See The Lowest Full Moon Since 2006 - Forbes
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
The bolt then partially travels down the line to your home.
Giants Activate Jerar Encarnacion - MLB Trade Rumors
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
what exactly is a ‘surge’ protector?
It also is a device that limits the change in current flow.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
[old diagram got deleted by accident]
This is where the MOV conducts again, and dissipated the energy.
Southwest Floats First Class, Lounges, Long Haul Flying: Good Strategy? - One Mile at a Time
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
But it can get overloaded, and no longer works.
ASCO day 2: A tragic paradox, Gilead updates, and lots of Pfizer news - statnews.com
These are simplified answers to the original question, and does not change anything I wrote above.
The other is “what does a “fuse” do?”
These devices are installed between the “hot” and “neutral” and protective ground.
2024–10–14 [Omar Gharbi Omar Gharbi ]
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
nine
Don’t Miss This Rare Chance to See the Milky Way’s Glowing Core - SciTechDaily
[image of Common-mode choke]
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
An AC voltage/ current source, and an ac inductive load.
What is your review of the Redmi 9A? Is it worth buying?
The third is lightning and “how it gets conducted into a home.”
This one hit behind the barn.
This is 'the assistant's answer'
Which type of physical cable has fastest transmission speed?
What is lightning?
so, what happens?
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
CNN’s Live ‘Good Night, and Good Luck’ Telecast Spurs Special Coverage - Variety
One
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
a photo is worth a thousand words.
Listen to the eerie sounds of Mars recorded by a NASA rover - Mashable
This device then solves the entire problem.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
Upvotes:
What are some cool confidence hacks?
It seems Mohan does not understand the difference between a comment and an Answer.
but this device (an Inductor) … impedes the rapid changes in the current.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
I post the exact comment here.
the problem then depends on "how fast does the fuse operate?".
What does a fuse do?
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Edit 2024–10.
But… the neutral is now “floating” because of the 1 ohm resistance.
One is “what exactly is in a ‘surge protector’ ? ”
Here is a simplified AC power diagram.
So, the voltage could go up to 500 volts, and the fuse will not open up.
but I think this circuit , shows a few more pieces.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
He then describes Rainy Season and Lightning.
2024–10–16 [ OO OLAOYE OYEBODE ]
First Sentence:
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Now when you have a certain ac resistance, then a current flows in a loop.
Because the load is inductive, the current lags the voltage.(by a bit).
eight
A circuit breaker is similar, but is resettable.
There are three different concepts here that are getting confused.
The MOV will conduct when the voltage exceeds 50% of line voltage.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
A fuse is a non-resetable over current circuit protector.
At least they know the answer if they wanted it.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
At one ohm, the resistor has a maximum of 1 watt power.
(Dc diagram shown, AC is similar).
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
For this case there are devices called Metal oxide varistors (MOV).
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
There are two important concepts here.
He then asserts :
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
This is where this question deviates from being a 'generic' question, and becomes more specific.